SBPF-100 Automatic Monoblock Dry Syrup Powder Filling Cap Sealing Machine
 
SBPF-100 Automatic Monoblock Dry Syrup Powder Filling Cap Sealing Machine
SBPF-100 Automatic Monoblock Dry Syrup Powder Filling Cap Sealing Machine is a Compact machine used for filling and sealing of Dry Syrup in bottles.
 
Operation
The incoming dry container (sterilized and siliconised) are fed through the infeed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding to the feed worm for correct spacing between two bottles and get enter into the infeed starwheel, which will be transferred below funnel, 16 nos. of funnel is mounted on round plate and powder filling head is mounted from centre pipe, which gives the flexibility to adjust position of wheel as per requirements and consumes less space on machine. Machine will be having a lifter assembly on base of bottom plate, when bottle come below funnel, bottom platform will lift the bottle and insert the bottle tight fit inside funnel.
 
 
The sterilized powder is stored in to powder hopper is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density, powder wheel rotates at the pre-determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel and vacuum plate is provided there is no clearance between powder wheel and avacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade, now doctor blades can be adjusted from outside also without removing powder hopper, when powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertical position. The time dose of Compressed air, sterilized low pressure air or Nitrogen Gas sequentially flushes out powder from the port of powder wheel in to the funnel.

Funnel will be equipped with square rod to break the solid slug of powder and powder will start to fill inside bottle, which is moving along with funnel. In this model Bottle is getting around 5 to 6 second filling time. Bottles further move with funnel and reaches to exit starwheel, which is infeed starwheel for eight head ROPP cap sealing machine, while rotating with startwheel bottle picks up the cap from exit end of chute, ROPP caps kept in orientation unit, automatically orient caps in right direction before entering into delivery chute. And Bottle is entering below the sealing head, consisting of total four rollers, Two rollers properly Skirts, Spins and Seals the cap and simultaneously another two roller performs perfect threading according to bottle neck diameter. After sealing operation, sealing head moves upward with help of cam and bottle enters into exit starwheel. Move further on conveyor belt for next operation.
 
Salient Features :
  • High Production Capacity in High Filling Quantity also.M.S. Moulded structure duly powder coated to avoid any vibration with adjustable Screws to adjust conveyor height as perinfeed tunnel.
  • Total Compact Monoblack cGMP model.
  • All parts and assemblies coming in contact with powder are made of S.S.316
  • "NO BOTTLE, NO FILL" System eliminates wastage of costly powder.
  • Spring loaded Teflon top seal for powder hopper reduces the friction between and top seal and avoid chance of white
    particle shading during production.
  • Doctor blade and wiper blade can be adjusted from outside also without disturbing any production, which saves lot of
    time, powder wastage and chances of area condition disturbance.
  • All assemblies under top plate are positioned as for easy cleaning or maintenance.
  • All driving is through High quality imported Gear motor.
  • Machine speed can be adjusted through A.C. Frequency drive, which is time saving.
  • Machine is provided with delrin conveyor belt to avoid sticking of bottle on conveyor.
  • Special clutch devices are provided on Star wheels for safety purpose.
    Air filter will be of S.S.316 housing with Nylon cartridge for proper removal of particle of 0.22 micron having 10" length.
  • Vacuum filter will be of PVC transparent material with nylon cartridge having length of 10" of 5 micron.
  • Machine can fill 10 grams to 50 grams powder in single stroke.
 
Utilities :(To be Provided by Buyer)
Pneumatic Air Filtered, oil free, sterile low pressure AIR at 4 kg/cm2 (4/6 bar)
Vacuum line
 20 HG. (Pump will be supplied by us
 

Manufacturer and Supplier of Rotary Powder Filling machine, Rotary Auger Filler machine, Rotary Powder filling - Capping machine

 
Semi Automatic Auger Filling Machine   |  Automatic Dry Injectable Powder Filling And Pick And Place Type Rubber Stoppering Machine Model SPM-300DP (a compact BUT fully loaded machine)   |   SBPF-100 Automatic Monoblock Dry Syrup Powder Filling Cap Sealing Machine    |    SBAF-D-100 Automatic Double Head Auger Type Powder Filling Machine   |   SBAF - 60 Automatic Single Head Auger Type Dry Syrup Powder Filling Machine   |   Automatic Single Head Auger Type Powder Filling Machine GMP Model    |   Automatic Rotary Monoblock 16x8 Dry Syrup Powder Filling & Capping Machine SBPFC-120R   |   Automatic Rotary Monoblock 12x8 Dry Syrup Powder Filling & Capping Machine SBPFC-120R    |    Automatic Vertical Form, Fill & Seal Powder Packing Machine (Auger Type)   |   
Automatic Form Fill & Seal Powder Pouch Packing Machine. (Telescopic Cup Filler)    |    Powder Filling Machine - Automatic Single Head Rotary Dry Syrup Powder Filling Machine SBPF-D-80 GMP Model     |    Automatic Single Head Rotary Dry Syrup Powder Filling Machine SBPF-D-40 GMP Model     |   Automatic Four Head Auger Type Powder Filling Machine Model No. SBAF-120 GMP Model    |   Automatic Three Head Auger Type Powder Filling Machine Model No. SBAF – 100 GMP Model    |    Automatic Volumetric Cup Type Powder Filling Machine Model No. SBCF-6 GMP Model    |   Semi Automatic Powder Filling Machine Model No. SBPF - 40 GMP Model    |   Automatic Four Head Auger Type Powder Filling Machine Model No. SBAF-120-B GMP Model    |   Automatic Three Head Auger Type Powder Filling Machine Model No. SBAF – 120 GMP Model    |   Automatic Double Head Auger Type Powder Filling Machine Model No. SBAF-100 GMP Model    |   Automatic Single Head Auger Type Powder Filling Machine Model No. SBAF-60 GMP Model    |    Semi Automatic Single Head Auger Type Powder Filling Machine SBAF – 40 GMP Model     |   Automatic High Speed Injectable Powder Filling With Rubber Stoppering Machine     |    Automatic Injectable Powder Filling With Rubber Stoppering Machine SBPF-125     |    Automatic Dry Syrup Powder Filling Machine - SBDPF-60     |    Automatic Single Head Dry Syrup (Micro Doze Type) Powder Filling Machine SBPF-D-60     |   Automatic Double Head Dry Syrup Micro Doze Type Powder Filling Machine SBPF-D-100    |   Automatic Injectable Dry Powder Filling with Rubber Stoppering Machine SBPF-60 GMP Model     |    Automatic Injectable Dry Powder Filling with Rubber Stoppering Machine SBPF-120 GMP Model     |    
Automatic Injectable Dry Powder Filling with Rubber Stoppering Machine SBPF-240 GMP Model
 
 
Home     |    Profile     |    Products     |   Clients     |   Contact     |    Enquiry